Shock absorbers type Evolution II & Evolution III

 

Proflex proudly presents their customers their new products. The Shock Absorbers type Evolution II & Evolution III. These shock absorbers are equipped with Proflex' newest, home developed technologies. Proflex has patented these inventions. These new technologies really improve the working of the product to the maximum. This is done by reducing the friction inside the shock absorber, this causes a decrease of heat inside the shock and of course a better performance of the shock absorber itself. These types of shock absorbers are available for cars that participate in Rally, Rally Racing and Circuit Racing. With the shock absorber we can furnish all kinds of springs, so you can perfectly adjust your Shock Absorbers and car to the circumstances in which you drive. All to fulfill your personal requirements and those of your car.

 

type Evolution II

Group N

Group A

Circuit Racing

type Evolution III

Group N

Group A

Circuit Racing

type Evolution II:

The Evolution 2 Mac Pherson - type strut assembly is available in 45.0 mm and 55.0 mm sized units. Suitable for Gp N, Gp A and circuit applications. This specification consists of one roller bearing assembly attached to the insert, and one fixed P.T.F.E. bush on the top of the outer casing. Frequent lubrication of the fixed bush can easily be carried out using the special grease and applicator provided. Should it be necessary to replace the top bush, this can easily be done by the individual without use of special tools. The rollers used in this system are guaranteed against failure for a period of 12 months provided that the correct levels of maintenance are carried out between events. For maintenance of this shock absorber you can download the manual.

 

 

download  manual 

   

download Acrobat reader

 

 

type Evolution III:

The Evolution 3 Mac Pherson - type strut assembly is also available in 45.0 mm and 55.0 mm sized units, suitable for Gp N, Gp A , W.R.C. and circuit applications. This specification consists of one roller bearing assembly attached to the insert, and an additional rollerbearing assembly at the top of the outer casing. The 'Full Roller Bearing' strut assembly, developed under W.R.C. conditions, has lead to possibly the lowest friction strut assembly that is generally available. The rollers used in this system are guaranteed against failure for a period of 12 months provided that the correct levels of maintenance are carried out between events. For maintenance of this shock absorber you can download the manual.

 

 

 

 

download  manual 
   

download Acrobat reader

 

 

type Evolution I:

Proflex doesn't produce The Evolution 1 shock absorber anymore. This because it is succeeded by the Evolution 2 and Evolution 3 shock absorbers. Still there are a lot of Evolution 1 shock absorbers in use, so for maintenance of this shock absorber you can download the manual. 

 

 

 

 

download  manual 
   

download Acrobat reader

=